Zac Higgins
Zac Higgins
  • 767
  • 7 042 539

Відео

How to Demold Pen Blanks from Vertical Silicone Molds
Переглядів 2,4 тис.Рік тому
How to Demold Pen Blanks from Vertical Silicone Molds
How to Make Thick Resin Thinner - Super Simple & Cheap Setup
Переглядів 19 тис.Рік тому
How to Make Thick Resin Thinner - Super Simple & Cheap Setup
Mystery Box 5 - 5 Piece Set of ???
Переглядів 1,7 тис.Рік тому
Mystery Box 5 - 5 Piece Set of ???
Resin Turning - 🎅🏻 Holiday Ornament Challenge 2022
Переглядів 1,6 тис.Рік тому
Resin Turning - 🎅🏻 Holiday Ornament Challenge 2022
Mystery Box 4 - Halloween Edition 🎃
Переглядів 692Рік тому
Mystery Box 4 - Halloween Edition 🎃
Mystery Box Number 3 😳 Oh No, what did they send me this time???
Переглядів 1,4 тис.Рік тому
Mystery Box Number 3 😳 Oh No, what did they send me this time???
Mystery Box Number 2 - Warning Shrapnel May Fly 😂
Переглядів 1,3 тис.2 роки тому
Mystery Box Number 2 - Warning Shrapnel May Fly 😂
Alumilite Resin & Raffle Ticket Bowl - Resin Casting and Bowl Turning
Переглядів 1,4 тис.2 роки тому
Alumilite Resin & Raffle Ticket Bowl - Resin Casting and Bowl Turning
What Did Turners Warehouse Send Me??? Mystery Resin Casting and Woodturning Project
Переглядів 3,4 тис.2 роки тому
What Did Turners Warehouse Send Me??? Mystery Resin Casting and Woodturning Project
SoCal Turners Expo 2022 Recap
Переглядів 9142 роки тому
SoCal Turners Expo 2022 Recap
Replacing FEP Sheet on Elegoo Resin 3D Printers
Переглядів 21 тис.2 роки тому
Replacing FEP Sheet on Elegoo Resin 3D Printers
Pen Turning: 4th of July Theme 3D Prints Cast in Alumilite Resin
Переглядів 1,9 тис.2 роки тому
Pen Turning: 4th of July Theme 3D Prints Cast in Alumilite Resin
Join Me at the SoCal Turners Expo 2022 - July 2-3 in Anaheim, CA
Переглядів 4992 роки тому
Join Me at the SoCal Turners Expo 2022 - July 2-3 in Anaheim, CA
A Quick and Easy Way to Filter Dirty Isopropyl Alcohol (IPA) for Washing Resin 3D Prints
Переглядів 36 тис.2 роки тому
A Quick and Easy Way to Filter Dirty Isopropyl Alcohol (IPA) for Washing Resin 3D Prints
Pressure Pot Made For Resin Casting (No Setup Required) - The California Air Tools 2.5 Gallon Pot
Переглядів 44 тис.2 роки тому
Pressure Pot Made For Resin Casting (No Setup Required) - The California Air Tools 2.5 Gallon Pot
Making A Cigar Style Pen Out of Colored Pencils Cast in Epoxy
Переглядів 3,6 тис.2 роки тому
Making A Cigar Style Pen Out of Colored Pencils Cast in Epoxy
Tips on Removing Failed Prints from FEP | Resin 3D Printing
Переглядів 12 тис.2 роки тому
Tips on Removing Failed Prints from FEP | Resin 3D Printing
Life Savers Cast in Resin - Wine Bottle Stopper
Переглядів 2,8 тис.2 роки тому
Life Savers Cast in Resin - Wine Bottle Stopper
Marshmallow + Resin? I can't believe this actually worked... sort of!! 🤣
Переглядів 2,2 тис.2 роки тому
Marshmallow Resin? I can't believe this actually worked... sort of!! 🤣
My New Mobile Workshop Air Filtration System (for Dust and Fumes) - The Axiom Stratus
Переглядів 2,5 тис.2 роки тому
My New Mobile Workshop Air Filtration System (for Dust and Fumes) - The Axiom Stratus
So Simple! Using Resin 3D Printing and Epoxy to Make a Segmented Pen
Переглядів 4,5 тис.2 роки тому
So Simple! Using Resin 3D Printing and Epoxy to Make a Segmented Pen
Crazy Patterns with Resin Casting Colored Epoxy Flakes
Переглядів 2,7 тис.2 роки тому
Crazy Patterns with Resin Casting Colored Epoxy Flakes
Must Have SLA Resin 3D Printing Safety, Washing, and Supplies
Переглядів 9 тис.2 роки тому
Must Have SLA Resin 3D Printing Safety, Washing, and Supplies
Simple Shop Project: Making a Resin & Pinecone Handle for My Table Saw Fence
Переглядів 4,7 тис.2 роки тому
Simple Shop Project: Making a Resin & Pinecone Handle for My Table Saw Fence
Casting 3D Printed Clovers
Переглядів 1 тис.2 роки тому
Casting 3D Printed Clovers
Resin (MSLA) 3D Printing: 5 Things You Need to Know Before You Begin
Переглядів 5 тис.2 роки тому
Resin (MSLA) 3D Printing: 5 Things You Need to Know Before You Begin
Elegoo Saturn Resin 3D Printer Unboxing & First Prints
Переглядів 3,6 тис.2 роки тому
Elegoo Saturn Resin 3D Printer Unboxing & First Prints
Big Announcement!!! Rebranding Launch & New Website 🥳🙌🙌
Переглядів 2,3 тис.2 роки тому
Big Announcement!!! Rebranding Launch & New Website 🥳🙌🙌
Making a Mini Pinecone and Resin Ornament on the Lathe - St Jude Ornament Challenge 2021
Переглядів 2,9 тис.2 роки тому
Making a Mini Pinecone and Resin Ornament on the Lathe - St Jude Ornament Challenge 2021

КОМЕНТАРІ

  • @PeterAgostiniJdcap26
    @PeterAgostiniJdcap26 20 годин тому

    Master pen 🖊️ maker channel !

  • @Paul-Coburn
    @Paul-Coburn День тому

    Great show Zac. Thank you.

  • @KimberlyWendt-lc2iv
    @KimberlyWendt-lc2iv День тому

    on camera looks like honey mustard color

    • @ZacHiggins
      @ZacHiggins 9 годин тому

      Yeah, might be a little on the yellow side, we'll have to see when we demold them. Color is really tough, sometimes they look good one day, and not so good the next LOL

  • @KimberlyWendt-lc2iv
    @KimberlyWendt-lc2iv День тому

    an you post a link to that light please?

    • @ZacHiggins
      @ZacHiggins 9 годин тому

      I couldn't find the exact one that I was using since it is so old, but I found one that should work just as well though: amzn.to/3YXIphc

  • @KimberlyWendt-lc2iv
    @KimberlyWendt-lc2iv День тому

    catching the last part on replay....that light works great

    • @ZacHiggins
      @ZacHiggins 9 годин тому

      It's pretty nice to be able to pour to a certain amount in each tube, but it doesn't work too well for the opaque molds 😆

  • @MarklTucson
    @MarklTucson День тому

    Really looking forward to seeing how these turn out and how the pens turned come out.

    • @ZacHiggins
      @ZacHiggins 9 годин тому

      I'm hoping that it looks decent. A little concerned about the tan color, might be a little too yellow or dark, but we'll have to see when it comes out. Hope they look decent!

  • @JennifersCraftCreations
    @JennifersCraftCreations День тому

    Great live as always BULLSEYE

  • @YoiYoi雕與塑
    @YoiYoi雕與塑 4 дні тому

    Thank you so Much for this video. I am wondering what kind of air compressor to use with it since it’s kinda small. What would you recommend?

  • @BushmasterBlaster
    @BushmasterBlaster 4 дні тому

    Wow! BULLSEYE looks promising! I’ve only turned a few pens but fountain pens have got to be my favorite.

    • @ZacHiggins
      @ZacHiggins 4 дні тому

      I think you'll like the kits from them for sure!

  • @Barbie46
    @Barbie46 5 днів тому

    6:39 did you use black ink dye or mica powder for the black swirls?

  • @paulinvegas2861
    @paulinvegas2861 6 днів тому

    I’m not a get fan on fountain pens as I grow older, but the BULLSEYE has got my attention. Thanks.

    • @ZacHiggins
      @ZacHiggins 4 дні тому

      They also make rollerball versions in both kits 😀

  • @myralynnette
    @myralynnette 6 днів тому

    Stunning!

  • @kevinparnell5416
    @kevinparnell5416 6 днів тому

    I love BULLSEYE great customer service. Awesome stream. Sad I only get to watch it the next day or two after

    • @ZacHiggins
      @ZacHiggins 4 дні тому

      They definitely rock! Awesome folks 😀

  • @keithedwards1038
    @keithedwards1038 6 днів тому

    Way too much time playing with the camera and not enough time focusing on the process

  • @sethv.1349
    @sethv.1349 7 днів тому

    Always like seeing demos of BULLSEYE closed end kits. They are more challenging to work with, but much more rewarding in the end. I've blown up a couple blanks myself.

    • @ZacHiggins
      @ZacHiggins 6 днів тому

      They are a little more challenging than something like a Sierra, but not much more difficult once you've got one or two under your belt. Definitely make some awesome looking pens though! Good luck in the drawing

  • @kevinzogg3331
    @kevinzogg3331 7 днів тому

    Kate over at BULLSEYE was very helpful answering my questions with the first Apollo I turned. Great customer service!

    • @ZacHiggins
      @ZacHiggins 6 днів тому

      She is awesome! Her whole family is awesome too!

  • @joanbusby3213
    @joanbusby3213 8 днів тому

    I will be checking out BULLSEYE

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Good luck in the giveaway 😀

  • @user-nh6sg5vn4o
    @user-nh6sg5vn4o 8 днів тому

    Looking forward to ordering BULLSEYE turning kit, great show Zach

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thanks for joining the fun!

  • @heatherpendergrast2516
    @heatherpendergrast2516 8 днів тому

    BULLSEYE Thanks Zac and Bellseye turning for the opportunity to enter

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Good luck in the drawing!

  • @ericbrown9251
    @ericbrown9251 8 днів тому

    BULLSEYE I am having a problem finding a collet chuck for the Laguna 1836.

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      They sell the Beall collet chuck at Lee Valley: www.leevalley.com/en-us/shop/tools/power-tool-accessories/chucks/115526-beall-collet-chuck-sets That's the one I have, and it works great. Craft Supplies USA has a cheaper option: woodturnerscatalog.com/products/apprentice-collet-chuck-7-piece-set?variant=40619123900439 I haven't used this style, but I've heard the tightening system is a little more of a pain than the Beall style

  • @Paul-Coburn
    @Paul-Coburn 8 днів тому

    Great show Zac.

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thanks Paul! Had a blast making that pen today 😀

  • @slowfootlabeef704
    @slowfootlabeef704 8 днів тому

    I've just ordered a BULLSEYE kit and really appreciate the discount! Excellent video!

  • @terrylucas6339
    @terrylucas6339 8 днів тому

    BULLSEYE are going to be my go to fountain pen supplier!

  • @homerlex
    @homerlex 8 днів тому

    BULLSEYE kits are looking good.

  • @myralynnette
    @myralynnette 8 днів тому

    This was one of my favorite live streams! Thanks Kate and BULLSEYE!

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thanks for joining the fun!! I had a blast too, really enjoyed turning that pen up!

  • @EdJaszczak-w1z
    @EdJaszczak-w1z 8 днів тому

    It was great that Bullseye kits are American made.The pen look’s great thanks for the great job . I have learned a lot from you thanks again.

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thanks Ed! Great to hear that you're enjoying the show too. Good luck in the giveaway 🙌🙌

  • @kjtcrafts-kim4849
    @kjtcrafts-kim4849 8 днів тому

    BULLSEYE on the work Zac, awesome pen

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thank you 🙏🙏 Had a blast making it!

  • @dbbingham2457
    @dbbingham2457 8 днів тому

    I hope I get a BULLSEYE and get a pen kit if not I will be putting in a order at BULLSEYE

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Good luck in the giveaway 😀

  • @leliaguinn5307
    @leliaguinn5307 8 днів тому

    BULLSEYE on making a beautiful pen. It looks like a great way to make fountain pens.

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thanks Lelia 😀 They really are a great option for that bespoke look without having to mess with taps and dies. Pretty straight forward to make, and the resulting pens look great!

  • @timtingle6689
    @timtingle6689 8 днів тому

    Bullseye

  • @kimthomas4538
    @kimthomas4538 8 днів тому

    Great pen, had a great marbled effect. Thanks to BULLSEYE for the kits

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thanks Kim! The blank was interesting, never know what you're going to get the first time you try something out 😀

  • @dreamtimewoodcraft-mikemcewan
    @dreamtimewoodcraft-mikemcewan 8 днів тому

    Great stream today Zac. Awesome job BULLSEYE, with the donations to the stream. Thank you.

  • @vinniebaio2535
    @vinniebaio2535 8 днів тому

    Awesome kit from BULLSEYE can't wait to turn one.

  • @Radcon-2222
    @Radcon-2222 8 днів тому

    That was right on the mark BULLSEYE

  • @MarklTucson
    @MarklTucson 8 днів тому

    That pen turned out really cool Zac. Thanks to BULLSEYE for providing those kits.

    • @ZacHiggins
      @ZacHiggins 8 днів тому

      Thanks Mark! I was really happy with that one too. That kit was a really fun change of pace for me, and went well with the blank I think

  • @namenotshown9277
    @namenotshown9277 12 днів тому

    steam is the way to soften it

  • @buddhagreene9010
    @buddhagreene9010 12 днів тому

    Thank you! I was so curious how this effect was done when looking at blanks online for inspiration.

  • @WoodenItBeNice
    @WoodenItBeNice 12 днів тому

    They look great Zac. Looking forward to seeing which one you turn.

    • @ZacHiggins
      @ZacHiggins 11 днів тому

      Thanks Huw! Can't wait to make a pen with one of them 😀

  • @rodrigopadilla832
    @rodrigopadilla832 13 днів тому

    have you erev used vevor 2.5 gal pressure pot ?

  • @JakeThompson
    @JakeThompson 13 днів тому

    🦾🦾🦾

  • @welshpiper62
    @welshpiper62 13 днів тому

    Alot of white there zac

    • @ZacHiggins
      @ZacHiggins 13 днів тому

      True, we'll just have to see how they turned out on the insides

  • @homerlex
    @homerlex 13 днів тому

    I heard pneumatic pen blank demolding will be in the 2028 games. Keep practicing 😜

    • @ZacHiggins
      @ZacHiggins 13 днів тому

      I hope so, I'll be ready by 2028!

  • @WoodenItBeNice
    @WoodenItBeNice 15 днів тому

    Great video Zac, Couldn't watch live. Those kits from Bullseye look amazing. Do you think that a wood blank would work as well? Take care Zac. Cheers, Huw

    • @ZacHiggins
      @ZacHiggins 9 днів тому

      Hey Huw, yep wood works just the same. In fact, in Kate's video showing you how to make a pen out of them, she uses a wood blank. Here's a link to that video if you want to check it out: ua-cam.com/video/mmffE5JE8qE/v-deo.htmlsi=COogfBrQwg5inP4q

  • @jameslucas7073
    @jameslucas7073 15 днів тому

    Where did you buy the pen kit from ,great job

  • @Paul-Coburn
    @Paul-Coburn 15 днів тому

    Informative show Zac. Thank you.

    • @ZacHiggins
      @ZacHiggins 9 днів тому

      I'm glad it was helpful. I always try to share as much as I can, you never know when a random tip might make all the difference! See you tomorrow!

  • @fredkreusch9396
    @fredkreusch9396 15 днів тому

    What brand of spray lacquer did you use?

  • @MarklTucson
    @MarklTucson 15 днів тому

    Cool show Zac. Looking forward to seeing one turned next week

    • @ZacHiggins
      @ZacHiggins 9 днів тому

      Thanks Mark! I'm getting the blank ready to turn today. Can't wait to see how these turn out!

  • @TopGunMan
    @TopGunMan 20 днів тому

    Is that a pressure cooker or vacuum chamber?

  • @BellyBTNFuzz
    @BellyBTNFuzz 26 днів тому

    Maybe try Rubico as the final coat? You can dump some inside the piece and spin n dump out excess. Wow! What a stunning piece of art!

  • @geoffriehoiting1759
    @geoffriehoiting1759 26 днів тому

    Great, just a bit too late 👀Just ordered some extra FEP sheets but will do it like this in the future!